今天小编跟大家讲解下有关科技常识:IIS Web服务器支持高并发设置方法详解,相信小伙伴们对这个话题应该也很关注吧,小编也收集到了有关科技常识:IIS Web服务器支持高并发设置方法详解的相关资料,希望小伙伴会喜欢也能够帮助大家。
适用的IIS版本:IIS 7.0, IIS 7.5, IIS 8.0适用的Windows版本:Windows Server 2008, Windows Server 2008 R2, Windows Server 2012
1、应用程序池(Application Pool)的设置:
General->Queue Length设置为65535(队列长度所支持的最大值)Process Model->Idle Time-out设置为0(不让应用程序池因为没有请求而回收)Recycling->Regular Time Interval设置为0(禁用应用程序池定期自动回收)2、.Net Framework相关设置
a) 在machine.config中将
复制代码 代码如下:<processModel autoConfig="true"/>
改为
复制代码 代码如下:<processModel enable="true"requestQueueLimit="100000"/>(保存后该设置立即生效)
b) 打开C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\Browsers\Default.browser,找到<defaultBrowser id="Wml"parentID="Default">,注释<capabilities>部分,然后运行在命令行中运行aspnet_regbrowsers -i。
复制代码 代码如下:<defaultBrowser id="Wml"parentID="Default"> <identification> <header name="Accept"match="text/vnd\.wap\.wml|text/hdml"/> <header name="Accept"nonMatch="application/xhtml\+xml; profile|application/vnd\.wap\.xhtml\+xml"/> </identification><!-- <capabilities> <capability name="preferredRenderingMime"value="text/vnd.wap.wml"/> <capability name="preferredRenderingType"value="wml11"/> </capabilities>--></defaultBrowser>
以解决text/vnd.wap.wml问题。
3、IIS的applicationHost.config设置
设置命令:复制代码 代码如下:c:\windows\system32\inetsrv\appcmd.exe set config /section:serverRuntime /appConcurrentRequestLimit:100000
设置结果:复制代码 代码如下:<serverRuntime appConcurrentRequestLimit="100000"/>(保存后该设置立即生效)
4、http.sys的设置
注册表设置命令1(将最大连接数设置为10万):复制代码 代码如下:reg add HKLM\System\CurrentControlSet\Services\HTTP\Parameters /v MaxConnections /t REG_DWORD /d 100000
注册表设置命令2(解决Bad Request - Request Too Long问题):
复制代码 代码如下:reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters /v MaxFieldLength /t REG_DWORD /d 32768reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters /v MaxRequestBytes /t REG_DWORD /d 32768(需要在命令行运行 net stop http & net start http & iisreset 使设置生效)
5、针对负载均衡场景的设置
在Url Rewrite Module中增加如下的规则:
复制代码 代码如下:<rewrite> <allowedServerVariables> <add name="REMOTE_ADDR"/> </allowedServerVariables> <globalRules> <rule name="HTTP_X_Forwarded_For-to-REMOTE_ADDR"enabled="true"> <match url=".*"/> <serverVariables> <set name="REMOTE_ADDR"value="{HTTP_X_Forwarded_For}"/> </serverVariables> <action type="None"/> <conditions> <add input="{HTTP_X_Forwarded_For}"pattern="^$"negate="true"/> </conditions> </rule> </globalRules></rewrite>
6、 设置Cache-Control为public
在web.config中添加如下配置:
复制代码 代码如下:<configuration> <system.webServer> <staticContent> <clientCache cacheControlCustom="public"/> </staticContent> </system.webServer></configuration>
来源:爱蒂网